The Bosch 4100-09 10 in worksite table saw with gravity-rise wheeled stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The SquareLock? rip fence is engineered for maximum trueness and great ease-of-use, with the fence able to easily glide along the rail for one-handed operation. The Gravity-Rise? wheeled stand has 8 in treaded rubber-composite wheels and a collapsible design for easy transport and storage. It is jobsite-ready, with heavy-duty construction and it has a powder-coat finish for longevity. The Smart guard system is the first modular table saw blade guard, featuring a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The entire system attaches and detaches in seconds, will not interfere with work and stores on the tool. The table saw provides a 29 x 21-1/2 in square tabletop with a 25 in rip capacity for ripping 4 ft wide sheets goods in half, a 15 A, 4 hp max motor that provides a no-load rpm rating of 3650 and an integrated sub base that increases the tool life by protecting the table saw base.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.

Quick, easy change-out in production use with S2 tool steel construction and a Rockwell hardness between 58-62. Used in high torque applications, 1/4 in hex drive.

High carbon steel, fleam and tapered ground teeth. For very fast, clean wood cutting.

JIGSAW BLADE T-SHANK 3-5/8IN

HAMMER DRILL KIT 1/2INhuck gives users increased bit grip strength and corrosion resistance. The POWERSTATE brushless motor was built for thebrushless drill to provide up to 60 percent more power than the competitive set. Built-in REDLINK PLUS Intelligence ensures optimal tool performance and provides overload protection to prevent damage to the tool and battery during heavy applications. The REDLITHIUM high output HD12.0 battery pack delivers more work per charge and more work over the life of the pack than competitors. Includes: (1) M18 FUEL 1/2" Hammer Drill/Driver, (2) M18 RedLithium extended capacity batterypacks, (1) M18 & M12 multi-voltage charger, (1) belt clip, (1) bit holder, (1) carrying case and (1) side handle.

Extra thick blade is available in metal and wood. Ergonomic ProTouch handle provides comfort and control. Includes one 10 in, 24T metal blade and one 5 -1/4 in, 10T work blade.

Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.

Super thin laser cut kerf provides faster, cleaner, more exacting cuts. Perma-Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact-resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth. Used in applications such as smooth finish crosscuts in hardwood, softwood.

ROUTER BIT 3/4X1-5/8X1/2 SHK
Double bearing design allows you to choose the cutting direction that best suits your workpiece
Freud's top and bottom bearing bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern
Ideal for templates placed above or below the work piece or to trim laminates or veneer perfectly flush with countertops, shelving and other projects
Cuts all hardwoods, softwoods, plastic laminates and veneered plywood

Solid cabide 1/2 inch shank 3/4 inch bearing 3 7/8 inch total length Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge.

Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge. Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge.

IRWIN 38" BRAD POINT DRILL BIT

IMPACT BIT SET STEEL MIX 45PC
The Makita Impact XPS(TM) 60-Piece Impact Bit Set is perfect for use with high-torque impact drivers and lasts up to 90X longer than standard impact bits. Precision-machined tips ensure full contact fit for enhanced holding power. The optimized torsion zone geometry transfers impact energy for improved bit life, and the magnetic nut setters feature a lobular design to minimize rounding of hex fasteners. Unique steel construction offers excellent durability compared to S2 and S6 alloys. The bits are matte nickel coated for superior corrosion resistance. Pulse torsion rings transfer impact energy through the torsion zone and off of the bit tip safely. Bits are heat-treated to withstand even in most demanding jobs, including deck building, framing, installing plywood subfloor, and more. The set includes two 1-3/4" magnetic nut setters, one 2-3/8" insert bit holder, (31) 1" insert bits, (10) 2" power bits, and one 1/4" socket adapter.
California Proposition 65 Warning.
Features
Bits last up to 90X longer than standard impact bits
Bits feature precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life
Precision machined tips provide a superior full contact fit for improved holding power and longer life
Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip
Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
Unique steel composition is masterfully engineered for extended life compared to S2 and S6 alloys
Uniquely calibrated heat treating process for added durability
Matte Nickel surface for best in class corrosion resistance
12 sided bit collar for use with the Impact XPS(TM) Mag Boost sleeve for added holding power

Vulcan Bi-Metal Jig Saw Blade, 2-3/4 In L, 14 Tpi

BOSCH SPADE BIT 11/16"

Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches.